Lexmark X862de - Page 134

2-34 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
Check tray 1
or tray 2
orientation or
guides
Media size mismatch in
width.
The media width is incorrect.
Go to “Media size mismatch in width” on
page 2-177.
Check tray 2
guides
Tray 2 media size failure. Although tray 2 is in the printer, the media size is not
detected correctly.
Go to “Tray 2 media size failure” on page 2-193.
Check tray 3
or check tray
4 orientation
or guides
Media size mismatch in
width.
The media width is incorrect.
Go to “Media size mismatch in width” on
page 2-178.
Close cover F Bridge unit cover is open. The bridge unit assembly cover is open.
Refer to the Options Service Manual.
Close cover K HCF top door open The tray 5 HCF top door is open.
Refer to the Options Service Manual.
Close door A Printer left door open. The printer left door assembly is open.
Go to “Printer left door open” on page 2-184.
Close door B Printer left lower door open. The printer left lower door assembly is open.
Go to “Printer left lower door open” on
page 2-185.
Close door C 2TM/TTM left door assembly
open
The 2TM/TTM door is open.
TTM equipped machines, go to “2TM/TTM left door
assembly open” on page 2-175.
2TM equipped machines, refer to the Options
Service Manual.
Close door D Duplex left door open The duplex left cover is open.
Go to “Duplex left door assembly open” on
page 2-176.
Close door E Exit 2 left door open The exit 2 left door is open.
Go to “Exit 2 left door assembly open” on
page 2-176.
Close door G Finisher front door open. The finisher front door is open.
Refer to the Options Service Manual.
Close door J Printer front door open. The printer front door assembly is open.
Go to “Printer front door open” on page 2-183.
Close
surface H
Eject cover open. Finisher eject cover is open.
Refer to the Options Service Manual.
Empty hole
punch box
Punch waste box full. The punch waste box is full.
Refer to the Options Service Manual.
Insert hole
punch box
Punch waste box missing. No punch waste box.
Refer to the Options Service Manual.
Load staples Staple cartridge empty. Staple cartridge empty.
Refer to the Options Service Manual.
Error code or
message
Error contents Description/Action