Mitel 430 - Page 135

Routing elements
135
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Cyclic call distribution
Call distribution is the same as in the linear variant except that each new call is first sig-
nalled in each case to the next member in the row.
Fig. 67 Cyclic call distribution
Delayed Calls to Subgroups
Moreover, members of the member group elements can be divided into a main group
and a delayed subgroup.
The subgroup is called according to the set Call distribution:
• If call Call distribution is set to Global, the subgroup rings once the configured delay
time has elapsed.
•If Call distribution is set to Linear or Cyclic, the subgroup rings once the configured
forwarding time has elapsed after the call has been ringing at the last member of the
main group.
The members of the subgroup are always called with Call distribution = Global.
B1
B2
B16
A
B3
B1
B2
B16
A
B3
B1
B2
B16
A
B3
3. Call
2. Call
1. Call
User group
User group
User group