Routing elements
136
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
In Summary
In a user group there are two selectable times that can be used for controlling call dis-
tribution. Both are preconfigured in the system configuration:
• The delay time affects
– The user group elements. It can be activated/deactivated for each element.
– The subgroup of members of the member group set on global.
• The forwarding time for linear and cyclic call distribution among the members of the
member group.
The duration of the delay time and forwarding time can be set globally to 3, 5 or 7 ring-
ing cycles.
Other delay times can also be specified on a user’s terminal, e.g. the delayed signal-
ling on a line key of a key telephone or on a team key.
Fig. 68 Call distribution in a user group
200
Cordless group
Forwarding time for linear
and cyclic call distribution
Forwarding time to the
subgroup
Ring delay on the UG
elements
Call distribution
element
GB
User
OC
To Next Page
Loading...
