Call routing
243
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Phone number with an exchange access prefix
If the phone number has an exchange access prefix without route information (Ex-
change access business, Exchange access private, Cost centre selection), the call will
be routed on via the transit route.
If the phone number has a route selection prefix, the call will be routed via the corre-
sponding route.
Note:
If a number has a route selection prefix and if numbering plan identifier (NPI) is E.164, the call
will be routed via the transit route without truncating the prefix.
The exchange access prefix is set under Send access code in the route configuration
of the source PINX.
• Trunk group 3 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Max outgoing calls Number of calls going out simultaneously via this route
• Numbering plan identifier (NPI) E.164
• Type of number (TON) Unknown
• Send access code –
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Public
• Protocol DSS1
Parameter Parameter value
To Next Page
Loading...
