Mitel 430 - Page 284

Call logging (CL)
284
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
• Data field formatting
• The data field length
A data field can be identified by its position in the data record (Tab. 86).
Data field name
In PC5 format the data field name is not output.
Data format
A data field consists of a certain number of characters and a specific data format.
Tab. 8 4
shows the symbols used to describe the data fields in Tab. 86.
Tab. 84 Symbols used to describe the data format
Data field formatting
A data field can be formatted to be right or left justified and padded with leading num-
bers or blank spaces. Tab. 85
shows the symbols used to describe the data fields in
Tab. 8 6
.
Tab. 85 Symbols used for describing the data field formatting
Data field length
The length of a data field can be permanently defined or remain variable up to a maxi-
mum length.
Symbol Meaning Number of characters
i Integers see "Length" in Tab. 86
d Decimal figures see "Length" in Tab. 86
yymmdd yy = year, mm = month, dd = day 3 x 2 characters
hh:mm hh = hours, mm = minutes 2 x 2 characters
hhHmmMss hh = hours, mm = minutes, ss = seconds, H = "H", M
= "M"
3 x 2 characters
cbbpp c = primary channel group, bb = trunk card number,
pp = network interface number
1+2+2 characters
Symbol Meaning
I- Left justified
-I Right justified
0 Padded with "0" up to the permanently defined data field length
SP Padded with spaces up to the permanently defined data field length