Features
448
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Note:
Wave files with incorrect format cannot be played.
Tip:
Several files can be uploaded to the file system, provided they each have a different name. The
uploaded files can also be seen in the file browser ( =2s) under voice/short/. Files can also be
uploaded and/or deleted there.
Activating / deactivating welcome announcements
The announcement service cannot be activated or deactivated globally; instead, the in-
dividual welcome announcements are activated or deactivated. If several users share
the same welcome announcements, they can only be deactivated individually in the
call distribution elements. However, this configuration is only possible via WebAdmin.
Tab. 277 Announcement service: Activation functions
Notes:
– For the function codes to be carried out, the user must be assigned an authorization profile
with the administration right Audio services. Also the user PIN must not be set to the default
value "0000".
– A PISN user can only operate the control functions of his own local communication server
using the */# function codes.
Mitel Advanced Intelligent Network:
– In an AIN, announcements can be recorded on both the master and the satellites. The
parameters for the welcome texts can also be configured for each node. The announcement
service used is always that of the node through whose exchange interface the call is
received.
– It is not possible to upload the announcements of a satellite via the Master using WebAdmin.
Other other hand, the master can be used from the Announcement service view to go
directly to the Announcement service view of the satellites.
– The number of welcome announcements and voice channels in an AIN is determined by the
Master: If an Mitel 470 is used as the Master, each node also has 50 welcome announce-
ments and 6 simultaneous voice channels at its disposal, regardless of the type of communi-
cation server used there.
– With IP system phones the Master’s announcement service is always used; with cordless
phones it is the node at which the phone is currently located.
See also:
You can find a step-by-step description of how to define a welcome announcement in the
WebAdmin online help.
Functions Function codes
1)
1)
"yy": = welcome announcement <01...20> for Mitel 415/430 or <01...50> for Mitel 470
"[ ]": the digits inside the brackets are optional
"nn" stands for the node number. If no node number is indicated, the node used is that of the
phone with which the functions are carried out. With IP system phones this is always the Mas-
ter; with cordless phones it is the node at which the phone is currently located.)
Activate welcome announcement *931 yy [*nn] #
Deactivate welcome announcement #931 yy [*nn] #
To Next Page
Loading...
