Mitel 430 - Page 485

Features
485
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Phone booth operation, variant 1
A hotline destination is defined for user 45. When the receiver goes off-hook, "11" is di-
alled automatically and the operator console starts ringing.
Fig. 247 Signalling on the operator console with variant 1 of phone booth operation
Operating sequence on the operator console
• Answer the internal call on the corresponding line key
• Press phone box key (*3245 configured)
• Press enquiry call key
• Press free line key
• Press the End key --> phone box obtains dial tone and can dial out.
When the call in the phone booth is completed the charge recall signal will ring on the
operator console, and the call charge information is displayed (possibly with a delay,
depending on the configuration).
Fig. 248 Indication of charge recall
Phone booth operation, variant 2
Guest user 45 contacts Reception because he wants to make a phone call.
-- _________________o__
07 : 45
07 : 46
031 885 23 12
DO 28. SEP 2000
1. . . 5
Enquiry call DTMF Park Message
Phone booth no. 45
I : Call to the phone booth no. 45
I : Call from the phone booth no. 45
Line key
-- _________________o__
1. . . 5
07 : 49
031 885 23 12
DO 28. SEP 2000
001.40FR
Enquiry call DTMF Park Message
Phone booth no. 45
I : Charge recall phone booth no. 45
Line key