Mitel 430 - Page 486

Features
486
System functions and features as of R4.1
syd-0570/1.2 – R4.1 – 08.2016
Fig. 249 Signalling on the operator console with variant 2 of phone booth operation
The guest in the phone box picks up the receiver within 2 minutes and obtains a dial
tone. The line is signalled as "busy" on the operator console.
Operating sequence on the operator console:
• Press phone box key (*3245 configured)
• Press Enter key
• Press the End key
When the call in the phone box is completed the charge recall signal rings on the oper-
ator console and the call charge information is displayed in the same way as in variant
1 (possibly with a delay depending on the configuration).
Phone booth operation, variant 3
User 29, who does not have exchange access authorization, picks up the receiver and
dials the operator’s number (11). He asks for a trunk line and puts down the receiver.
Fig. 250 Signalling on the operator console with variant 3 of phone booth operation
Operating sequence on the operator console:
• Press function key (*32 configured)
• Suffix dial 29 or wait 2 seconds
• Press the End key
-- _________________o__
07 : 45
07 : 46
DO 28. SEP 2000
1. . . 5
*3245
Line key
I : Call from the phone booth no. 45
I : Call to the phone booth no. 45
Enquiry call DTMF Park Message
-- _________________o__
07 : 46
07 : 47
1. . . 5
*3245
DO 28. SEP 2000
Line key
I : Call from user 29
I : Function key charge recall (*32)
Enquiry call DTMF Park Message