Item Description
MAC Address Displays the MAC address of the client.
Mode Displays what kind of WiFi system the client used to associate with this device.
Rate Displays the data rate between client and this device.
RSSI0, RSSI1 Displays the RX sensitivity (RSSI) value for each radio path.
Signal The signal strength between the client and this device.
Interface Displays the VAP ID that the client associated with.
Refresh Click the Refresh button to update the Client List immediately.
Table 68 – Client List
3.3.3 Advanced Configuration
The router provides advanced wireless configuration for advanced users to optimize the wireless performance under the
specific installation environment. Please note that if you are not familiar with WiFi technology, do not adjust the Advanced
Configuration section or the connectivity and performance may be adversely affected with improper settings.
Navigate to the Basic Network > WiFi > Advanced Configuration Tab.
3.3.3.1 Select Target WiFi
Table 69 – Target WiFi
Item Notes Description
Operation Band Mandatory field.
Specify the intended operation band for the WiFi module.
Table 70 – Target WiFi
To Next Page
Loading...