NetCommWireless NTC-400 Series User Manual

NTC-400 Series
87 of 361
© NetComm Wireless 2018
3.2.3.6 View / Copy DHCP Client List
When the DHCP Client List button is applied, the DHCP Client List screen appears.
Figure 103 – View/Copy DHCP Client List
When the DHCP Client is selected and Copy to Fixed Mapping button is applied. The IP and MAC address of DHCP Client will
apply to the Mapping Rule List on the specified DHCP Server automatically.
3.2.3.7 Enable / Disable DHCP Server Options
The DHCP Server Options setting allows you to set DHCP OPTIONS 66, 72, or 114. Click the Enable button to activate the DHCP
option function and the DHCP Server will add the expected options in sending out DHCPOFFER DHCPACK packages.
Option Meaning RFC
66 TFTP server name
[RFC 2132]
72 Default World Wide Web Server
[RFC 2132]
114 URL
[RFC 3679]
Table 61 – Enable/Disable DCHCP Server Options
Figure 104 – Enable/Disable DCHCP Server Options
3.2.3.8 Create / Edit DHCP Server Options
The router supports up to a maximum of 99 option settings.
Figure 105 – Create / Edit DHCP Server Options
When the Add/Edit button is applied, the DHCP Server Option Configuration screen will appear.
Figure 106 – DHCP Server Option Configuration

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English