NetCommWireless NTC-400 Series User Manual

38 of 361
User Guide
© NetComm Wireless 2018
Item Value setting Description
Community System data. Displays the community for SNMP version 1 or version 2c
only.
Auth. Mode System data. Displays the authentication method for SNMP version 3 only.
Privacy Mode System data. Displays the privacy mode for version 3 only.
SNMP Version System data. Displays the SNMP Version employed.
Table 29 – SNMP Linking Status
SNMP Trap Information
SNMP Trap Information screen shows the status of current received SNMP traps.
Figure 39 – SNMP Trap Information
Item Value setting Description
Trap Level System data. Displays the trap level.
Time System data. Displays the timestamp of trap event.
Trap Event System data. Displays the IP address of the trap sender and event type.
Table 30 – SNMP Trap Information
TR-069 Status
TR-069 Status screen shows the current connection status with the TR-068 server.
Figure 40 – TR-069 Status
Item Value setting Description
Link Status System data. Displays the current connection status with the TR-068 server.
The connection status is either On when the device is
connected with the TR-068 server or Off when disconnected.
Table 31 – TR-069 Status
2.4.2 Log Storage Status
Go to Status > Administration > Log Storage tab.
The Log Storage Status screen shows the status for selected device storage.

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English