The NTC-400 Series Router allows you to activate and manage USSD services via a SIM card through its web GUI.
1 Select Cellular Toolkit from the Service submenu and click the USSD tab.
2 The USSD screen will open. It contains up to four sections: Configuration, USSD Profile List, USSD Profile
Configuration and USSD Request
Figure 369 – USSD interface
8.1.4.1 USSD Configuration
In the Configuration section you specify which 3G/4G module (physical interface) is used for the USSD function and the
system will show which SIM card is currently being used.
Figure 370 – USSD Configuration
Item Notes Description
Physical Interface The default setting is:
3G/4G-1
Choose a cellular interface (3G/4G-1 or 3G/4G-2) to
configure the USSD setting for the connected cellular
service.
SIM Status System generated The SIM card (identified with SIM_A or SIM_B) that is
associated with the selected cellular service.
Table 230 – USSD Configuration
To Next Page
Loading...