NetCommWireless NTC-400 Series User Manual

58 of 361
User Guide
© NetComm Wireless 2018
3.1.2.7 Configure SIM-A / SIM-B Card
Here you can configure the cellular connection profile.
Figure 64 – Connection with SIM-A Card
Note – The configuration of SIM-B Card is the same as SIM-A. SIM-A Card is shown here as an example.
Item Notes Description
Network Type Mandatory field.
Default setting: Auto
Select Auto to register on a network automatically, regardless of the network type. The
NTC-400 Series Router will give preference to high-speed networks.
Select 2G Only to register the 2G network only.
Select 2G Prefer to register the 2G network first if it is available.
Select 3G only to register the 3G network only.
Select 3G Prefer to register the 3G network first if it is available.
Select LTE only to register the LTE network only.
Note – Options may be different due to the specification of the module.
Band Selection Mandatory field.
Default setting: Auto
Select Auto to register a network automatically, regardless of the band.
Select Manual to select specific bands.
Band List Mandatory field. When Band Selection > Auto is selected, all bands are enabled and can’t be unchecked.
When Band Selection > Manual is selected, at least one band needs to be checked in
each network type.
Dial-Up Profile Mandatory field.
Default setting: Auto-
detection
Specify the type of connection profile for your 3G/4G network. It can be Manual-
configuration, APN Profile List, or Auto-detection.

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English