NetCommWireless NTC-400 Series User Manual

NTC-400 Series
83 of 361
© NetComm Wireless 2018
Figure 95 – Tag-based VLAN List
Click the Add button to display the Tag-based VLAN Configuration screen.
Figure 96 – Tag-based VLAN Configuration
Item Notes Description
VLAN ID Mandatory field. Define the VLAN ID number.
Range: 6 - 4094
Internet
Access
Enabled by default. Check  Enable to allow the members in the VLAN group access to the Internet.
Port Disabled by default. Check the LAN port box(es) to join the VLAN group.
VAP Disabled by default. Check the VAP box(es) to join the VLAN group.
DHCP Server Default setting: DHCP
1
Select a DHCP Server to these members of this VLAN group.
To create or edit DHCP server for VLAN, refer to Basic Network > LAN & VLAN > DHCP
Server.
Save Button Click the Save button to save the configuration.
Note – After clicking the Save button, always click the Apply button to apply the
settings.
Table 58 – Tag-based VLAN Configuration
3.2.3 DHCP Server
3.2.3.1 DHCP Server
The router supports up to 4 DHCP servers to fulfil the DHCP requests from different VLAN groups (please refer to the VLAN
section for more detail). You can add more DHCP server configurations by clicking on the “Add” button behind “DHCP Server
List”, or clicking on the “Edit” button at the end of each DHCP Server on the list to edit its settings. You can select a DHCP
Server and delete it by clicking on the “Select” check-box and then the “Delete” button.

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English