NetCommWireless NTC-400 Series User Manual

NTC-400 Series
37 of 361
© NetComm Wireless 2018
Table 28 – Firewall Options Status
Note – Ensure Firewall Options Log Alert is enabled.
Refer to Security > Firewall > Firewall Options tab. Check  Log Alert and save the setting.
2.4 Administration
Figure 37 – Status > Administration menu item
2.4.1 Configure & Manage Status
Navigate to the Status > Administration > Configure & Manage tab.
The Configure & Manage Status window shows the status for managing remote network devices. The type of management
available in your device is depended on the device model purchased. The commonly used ones are the SNMP, TR-069, and
UPnP.
SNMP Linking Status
SNMP Link Status screen shows the status of current active SNMP connections.
Figure 38 – SNMP Linking Status
Item Value setting Description
User Name System data. Displays the user name for authentication. This is only
available for SNMP version 3.
IP Address System data. Displays the IP address of SNMP manager.
Port System data. Displays the port number used to maintain connection with
the SNMP manager.

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English