Item Notes Description
Interval(s) Mandatory field. Specify the time interval (seconds) between two NMEA packets.
Value Range: 1 - 255 seconds.
Prefix Message Optional field.
Any text.
String format.
Specify optional prefix string with specific information if your backend
server can recognize.
For example, you can input the IMEI code of this device here, and then
your backend server can recognize this GPS data is sent from this device.
You can also leave this field blank.
Suffix Message Any text.
String format.
Specify optional suffix string with specific information if your backend
server can recognize.
Enable Disabled by default Check Enable to activate this remote host rule.
Save Button Click the Save button to save the configuration
Table 252 – Remote Host Configuration
8.3.2 Track Viewer
Track Viewer allows you to see the recent locations of the device using Google Maps or from the GPX file recorded by GNSS.
In addition, when GNSS is enabled, current position will also be displayed in Track Viewer.
Navigate to the Service > Location Tracking > Track Viewer tab.
8.3.2.1 Setup Google Maps API Key
On first use you will need to download a Google API Key.
From the Service > Location Tracking > Track Viewer tab page, either:
Enter the valid API key that you have, or
Click the [Get a key] link and follow the instructions on the Google Maps APIs website.
Figure 398 – Setup Google Maps API Key
To Next Page
Loading...