3.4.1.11 6in4 WAN Type Configuration
To establish a 6in4 tunnel, find an IPv6 tunnel broker. You can find a list of IPv6 tunnel brokers that support the 6in4 service
on Wikipedia.
Enter the Local IPv4 address of the router into the Client IPv4 Address field on the IPv6 tunnel broker setting page.
Figure 140 – 6in4 WAN Type Configuration
Item Notes Description
Remote IPv4
Address
Mandatory field. Enter the Server IPv4 Address from your tunnel broker in this
field.
Local IPv4 Address Value auto-created The IPv4 address of this router.
Local IPv6 Address Mandatory field. Enter the Client IPv6 Address from the tunnel broker in this
field.
Primary DNS Optional field. Enter the WAN primary DNS Server.
Secondary DNS Optional field. Enter the WAN secondary DNS Server.
MLD Disabled by default. Enable/Disable the MLD Snooping function
Table 83 – 6in4 WAN Type Configuration
To Next Page
Loading...