Figure 16 – Client List
Item Value setting Description
LAN Interface System data. Client record of LAN Interface. String Format.
IP Address System data. Client record of IP Address Type and the IP Address.
Type is String Format and the IP Address is IPv4 Format.
Host Name System data. Client record of Host Name. String Format.
MAC Address System data. Client record of MAC Address. MAC Address Format.
Remaining
Lease Time
System data. Client record of Remaining Lease Time. Time Format.
Table 9 – Client List
2.2.3 WiFi Status
Navigate to the Status > Basic Network > WiFi tab.
The WiFi Status window shows the overall statistics of WiFi VAP entries.
WiFi Virtual AP List
The WiFi Virtual AP List shows all of the virtual AP information. The Edit button allows for quick configuration changes.
Figure 17 – WiFi Virtual AP List
Item Value setting Description
Op. Band System data. Displays the Wi-Fi Operation Band (2.4G or 5G) of VAP.
ID System data. Displays the ID of VAP.
WiFi Enable System data. Displays whether the VAP wireless signal is enabled or disabled.
Op. Mode System data. The Wi-Fi Operation Mode of VAP. Depends of device model,
modes are AP Router, WDS Only and WDS Hybrid, Universal
Repeater and Client.
SSID System data. Displays the network ID of VAP.
Channel System data. Displays the wireless channel used.
To Next Page
Loading...
Need help?
General