NetCommWireless NTC-400 Series User Manual

NTC-400 Series
293 of 361
© NetComm Wireless 2018
Figure 332 – System Time Configuration - Manual Synchronization
Item Notes Description
Synchronization
method
Manual This setting determines the configuration settings
available.
Daylight Saving Time This is an optional item.
Disabled by default.
Check the  Enable button to activate the daylight
saving function.
When you enable this function, you have to specify
the start date and end date for daylight saving time
in your region.
Set Date and Time
Manually
Date and time settings Enter the date and exact time that you want the
clock to run from when the Save button is clicked.
Save Button Click the Save button to save the settings.
The system clock will be reset to begin at the time
entered.
Table 204 – System Time Configuration - Manual Synchronization
7.2.3.3 Time Server method
When the Time Server Synchronization method is chosen the following configuration settings are available:
Figure 333 – System Time Configuration - Local PC
Item Notes Description
Synchronization
method
PC This setting will use the system time of the PC that you have
opened the web interface on.
Time Zone Drop down
menu
Select the time zone of your device.
Synchronize
Immediately
Button Click the Active button the system will be set to the local PC’s
system date and time.
Sync Result System
generated and
button
When the Active button is clicked, the Time Synchronization
Results panel will display the time the synchronisation
occurred.

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English