8.2.1.1 Enable Event Management
Figure 378 – Enable Event Management
Item Notes Description
Event Management Disabled by default. Check the Enable box to activate the Event
Management function.
Table 235 – Enable Event Management
8.2.1.2 Enable SMS Management
To use the SMS management function, you must nominate an SMS message prefix that triggers the Event Handler to treat
the message in a specific way.
Figure 379 – Enable SMS Management
8.2.1.3 SMS Configuration
Item Notes Description
Message Prefix Disabled by default. Check the Enable box to activate the SMS prefix for
validating the received SMS.
Once the function is enabled, enter the text of the prefix in
the text box.
The received managing events SMS must have the
designated prefix as an initial identifier, then corresponding
handlers will become effective for further processing.
Physical Interface Default setting:
3G/4G-1
Choose a cellular interface (3G/4G-1 or 3G/4G-2) to handle
the SMS messaging.
SIM Status System generated. Show the connected cellular service (identified with SIM_A
or SIM_B).
Delete Managed
SMS after
Processing
Disabled by default. Check Enable to delete the received managing event
SMS after it has been processed.
Table 236 – Enable SMS Management
To Next Page
Loading...