Overview
Introduction
This document provides you all the information you need to set up, configure and use the NetComm Wireless NTC-400 Series
Router.
Target audience
This document is intended for system integrators or experienced hardware installers who understand telecommunications
terminology and concepts.
Prerequisites
Before continuing with the installation of your NTC-400 Series Router, please confirm that you have the following:
An electronic computing device with a working Ethernet network adapter and a web browser such as Internet Explorer®,
Mozilla Firefox® or Google Chrome™.
Notation
The following symbols are used in this user guide:
Note – The following note provides useful information.
Important – The following note requires attention.
Warning – The following note provides a warning.
To Next Page
Loading...