EasyManua.ls Logo

NetCommWireless NTC-400 Series

NetCommWireless NTC-400 Series
361 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NTC-400 Series
109 of 361
© NetComm Wireless 2018
3.4.1.1 IPv6 WAN Connection Types
Static IPv6
Static IPv6 performs the same function as static IPv4. The static IPv6 provides manual setting of IPv6 address, IPv6 default
gateway address, and IPv6 DNS.
Figure 126IPv6 WAN Connection Types - Static IPv6
The diagram above depicts the IPv6 IP addressing. Enter the information provided by your ISP to setup the IPv6 network.
DHCPv6
DHCP in IPv6 performs the same function as DHCP in IPv4. The DHCP server sends an IP address, DNS server addresses and
other possible data to the DHCP client to configure it automatically. The server also sends a lease time of the address and
time to re-contact the server for IPv6 address renewal. The client must then resend a request to renew the IPv6 address.
Figure 127IPv6 WAN Connection Types - DHCPv6

Table of Contents

Other manuals for NetCommWireless NTC-400 Series