Item Notes Description
Select Manual-configuration to set APN (Access Point Name), Dial Number, Account,
and Password to what your carrier provides.
Select APN Profile List to set more than one profile to attempt to connect to in order
until the connection is established.
Select Auto-detection to automatically select the best configuration by detecting the
SIM card and comparing it to the list on the router.
APN Mandatory field. Enter the APN you want to use to establish the connection.
If Dial-up profile is set to Manual configuration, this field must be completed.
PIN code String format: integer Enter the PIN (Personal Identification Number) code if required to unlock your SIM card.
Authentication
Mandatory field.
Default setting: Auto
Select either PAP (Password Authentication Protocol) or CHAP (Challenge Handshake
Authentication Protocol) to authenticate with the carrier’s server.
When Auto is selected, it means it will authenticate with the server using either PAP or
CHAP.
IP Mode Mandatory field.
Default setting:
Dynamic IP
When Dynamic IP is selected, all IP configuration is taken from the carrier’s server and
set on the device automatically.
If your carrier has provided you with a Static IP, you can switch to Static IP mode and fill
in all required parameters.
Note – IP Subnet Mask is Mandatory field.
Primary DNS String format: IP
address (IPv4 type)
Enter the IP address to change the primary DNS (Domain Name Server) setting. If it is
not filled-in, the server address is given by the carrier while connecting.
Secondary
DNS
String format: IP
address (IPv4 type)
Enter the IP address to change the secondary DNS (Domain Name Server) setting. If it is
not filled-in, the server address is given by the carrier while connecting.
Roaming Disabled by default. Check the box to establish a connection on other networks if a home network is not
available.
Note – Enabling this function may incur additional charges by your carrier.
Table 43 – Connection with SIM-A / SIM-B Card
3.1.2.8 Create/Edit SIM-A / SIM-B APN Profile List
You can add a new APN profile for the connection, or modify the content of the APN profile you added. It is available only
when you select Dial-Up Profile as APN Profile List.
Table 44 – SIM-A / SIM-B APN Profile List
The SIM-A APN Profile List displays all the APN profiles you have created. It is available only when you select Dial-Up Profile
as APN Profile List.
To Next Page
Loading...
Need help?
General