NetCommWireless NTC-400 Series User Manual

166 of 361
User Guide
© NetComm Wireless 2018
When Add button is applied, Host Group Configuration section will appear.
Item Notes Description
Group Name Enter text string.
Mandatory field.
Enter a meaningful group name for the rule.
Group Type Mandatory field.
Default selection:
IP Address-based
Select the member type for the host group from the drop down
list: IP Address-based, MAC Address-based, or Host Name-based
IP Address-based – Only IP address can be added in Member to
Join.
MAC Address – Only MAC address can be added in Member to
Join.
Host Name-based – Only host name can be added in Member to
Join.
Member to Join Button Add the members to the group in this field.
You can enter the member information that corresponds with
the Member Type above, and press the Join button to add to the
Member List, see next.
Member List List The names of users selected will appear in the row after they are
added using the Join button, see previous.
Click the circled x

to remove members.
Group Disabled by
default
Check  Enable to activate this host group rule.
Enabled Host Groups can be bound to selected service(s) for
further configuration.
Save Button Click Save to save the settings
Undo Button Click Undo to cancel the settings
Table 116 – Host Group Configuration
4.4 External Server
External Servers allow you to define a range of different types of servers that are external to the NTC-400 Series Router and
which then may be referenced by the NTC-400 Series Router during its operations.
The External Server List section shows all currently defined external servers and some of their settings.
To view the External Server List open the Object Definition submenu, select External Server and then click its External
Server tab:
Figure 201 – External Server list

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English