NetCommWireless NTC-400 Series User Manual

88 of 361
User Guide
© NetComm Wireless 2018
Item Notes Description
Option Name Mandatory field. String format. Enter a DHCP Server Option name that is meaningful to you.
DHCP Server
Select
Dropdown list of all available DHCP servers. Choose the DHCP server this option should apply to.
Option Select Mandatory field.
Default setting: Option 66
Choose the specific option from the dropdown list: Option 66,
Option 72 or Option 144
Option 66 for tftp
Option 72 for www
Option 144 for url
Type
Dropdown list of the type of DHCP server
option values.
Each option has different value settings.
66 Single IP Address
72 Single FQDN
114 IP Addresses List, separated by “,”
Value Mandatory field. Must contain data in the
following formats:
• IPv4 format
• FQDN format
• IP list
• URL format
Should conform to type:
Type Value
66 Single IP Address IPv4 format
72 Single FQDN FQDN format
114 Single URL URL format
Enable Disabled by default. Check  Enable to activate thés setting.
Save Button Click the Save button to save the setting.
Undo Button When the Undo button is clicked the screen will return back with
nothing changed.
Table 62 – DHCP Server Option Configuration

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English