NetCommWireless NTC-400 Series

NTC-400 Series
119 of 361
© NetComm Wireless 2018
Item Notes Description
Auto-configuration Disabled by default. Check to enable the Auto configuration feature.
Auto-configuration
Type
Can only be selected when
Auto-configuration is enabled.
Default setting: Stateless
Define the selected IPv6 WAN Connection Type to establish the IPv6
connectivity.
Select Stateless to manage the Local Area Network to be SLAAC + RDNSS
Router Advertisement Lifetime (mandatory field) – Enter the Router
Advertisement Lifetime (in seconds). 200Default setting:
Value Range: 0 - 65535.
Select Stateful to manage the Local Area Network to be Stateful
(DHCPv6).
IPv6 Address Range (Start) (mandatory field) – Enter the start IPv6 Address
for the DHCPv6 range for your local computers.
Default setting: 0100
Value Range: 0001 - FFFF.
IPv6 Address Range (End) (mandatory field) – Enter the end IPv6 Address for
the DHCPv6 range for your local computers.
Default setting: 0200
Value Range: 0001 - FFFF.
IPv6 Address Lifetime (mandatory field) – Enter the DHCPv6 lifetime for your
local computers.
Default setting: 36000
Value Range: 0 - 65535.
Table 85 – Address Auto-configuration