NetCommWireless NTC-400 Series User Manual

NTC-400 Series
163 of 361
© NetComm Wireless 2018
Figure 198 – User Group Configuration section
Item Notes Description
Group Name Mandatory field.
Enter an alpha-
numeric string.
Enter the name of user group.
Value Range: at least 1 character, can be A - Z, a - z, or 0 - 9
Multiple User
Members
Button Click the Choice button to select multiple user accounts to
join the group. The names of users selected will appear after
the Choice button.
Click the circled x

to remove members.
Multiple Bound
Services
Button Check the available service box(es) to apply one or more to
the user group.
QoS & BWM
Property
Mandatory field.
Default selection:
Individual Control
Specify the preferred sharing method for how to apply a QoS
rule on the selected group (Individual or Group), and define
the guaranteed and limited bandwidth usage for the group
Individual Control – Each user in the group will have his own
QoS service resource as specified in the rule.
Group Control – The entire user group shares the same QoS
service resource.
Other settings:
MINR – Guaranteed minimum bandwidth usage.
MAXR – Maximum bandwidth usage.
Select Kbps or Mbps for the download speed.
Policy Routing
Property
Mandatory field.
Default setting:
WAN-1
Specify the routing interface.
All packets from the group members will be routed via the
specified interface.
Group Mandatory field.
Enabled by default.
Check  Enable to activate the user group.
Save Button Click the Save button to save the settings
Undo Button Click the Undo button to cancel the settings
Table 114 – User Group Configuration

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English