NetCommWireless NTC-400 Series User Manual

168 of 361
User Guide
© NetComm Wireless 2018
4 Enter the new External Server’s details here and click Save.
To edit an existing External Server:
1 From the Object Definition submenu select External Server and then click its External Server tab.
2 In the External Server List section find the User Profile record in the list and click its corresponding Edit button in the
Actions column of the list.
3 The External Server Configuration section will open, see below.
4 Make the necessary corrections or changes to the existing External Server’s details and click Save.
Figure 202 – External Server Configuration
Item Notes Description
Server
Name
Enter text string.
Mandatory field.
Enter a meaningful name for the external server.
Server Type Mandatory field.
Select from drop
down list.
Default selection:
Email Server
Email Server
When Email Server is selected, User Name, and Password are also required.
User Name (String format: any text)
Password (String format: any text)
Syslog Server – No further settings required
RADIUS Server
When RADIUS Server is selected, the following settings are also required:
Primary:
Shared Key (String format: any text)
Authentication Protocol (Default: CHAP)

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English