NetCommWireless NTC-400 Series User Manual

NTC-400 Series
209 of 361
© NetComm Wireless 2018
Item Notes Description
Remote Subnet Mandatory field. Enter the Remote Subnet IP address
Remote Netmask Mandatory field. Enter the Remote Subnet Mask.
Remote Gateway Mandatory field. Enter the Remote Router’s IPv4 address or
FQDN name.
Table 145 – Manual Key Management
Under the Manually Key Management authentication configuration, only one subnet is supported for both Local and Remote
IPSec peer.
Figure 245 – Manual Proposal
Item
Notes
Description
Outbound SPI Hexadecimal format Enter the Outbound SPI for this IPSec tunnel.
Value Range: 0 - FFFF
.
Inbound SPI Hexadecimal format Enter the Inbound SPI for this IPSec tunnel.
Value Range: 0 - FFFF.
Encryption Mandatory field.
Hexadecimal format
Enter the Encryption Method and Encryption key .
Available encryption methods are
DES , 3DES , AES-128 , AES-
192
or AES-256.
The key length for DES is 16 , 3DES is 48 , AES-128 is 32 , AES-
192 is
48 , and AES-256 is 64 .
Note – When AH option in Encapsulation is
selected, encryption will not be available.
Authentication Mandatory field.
Hexadecimal format
Enter the Authentication Method and Authentication key .
Available encryptions are None , MD5 , SHA1 or SHA2-256
The key length for MD5 is 32 , SHA1 is 40 , and SHA2-2 56 is
64 .
Note – When AH option in Encapsulation
Protocol is selected, None option in
Authentication will not be available.
Save Button Click Save to save the settings
Undo Button Click Undo to cancel the settings
Back Button Click Back to return to the previous page.
Table 146 – Manual Proposal

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English