Item Notes Description
Select IP Range to filter packets coming from a specified range of IP
address entered in this field.
Select IP Address-based Group
from the drop down list to filter packets
coming from the selected group.
Note – Groups must be pre-defined before this selection
become available in the drop down list.
Refer to Object Definition > Grouping > Host grouping.
Alternatively, click the
Add Rule
button that displays when
this drop down list is empty to create a new group.
Source MAC
Mandatory field.
Default selection: Any
This field specifies the source MAC address or addresses.
Select
Any
to filter packets coming from any MAC address.
Select
Specific MAC Address
to filter packets coming from a MAC
address entered in this field.
Select
MAC Address-based Group
from the drop down list to filter
packets coming from the selected group.
Note
– Groups must be pre-defined before this selection
become available in the drop down list.
Refer to
Object Definition > Grouping > Host grouping
.
Alternatively, click the
Add Rule
button that displays when
this drop down list is empty to create a new group.
Chat Software Multiple check boxes.
All unselected by default.
Check one or more Chat Software application filter functions you want
activate for this rule.
Available chat applications include: QQ, Facebook, Aliww and Line
P2P Software Multiple check boxes.
All unselected by default.
Check one or more P2P Software application filter functions you want
activate for this rule.
Available P2P applications include: BT, HTTP Multiple, and Thread
Download
Streaming Multiple check boxes.
All unselected by default.
Check one or more data Streaming application filter functions you want
activate for this rule.
Available streaming applications include: MMS or RTSP
Time Schedule
Mandatory field.
Select a
Time Schedule
from the drop down list to apply to this rule or
leave it as Always (i.e. without a time parameter).
If the drop down list is empty you will need to define a Time Schedule
using the
Object Definition > Scheduling > Configuration
tab.
To Next Page
Loading...
Need help?
General