NetCommWireless NTC-400 Series User Manual

50 of 361
User Guide
© NetComm Wireless 2018
PPTP
When WAN Type is set to PPTP, the following options are displayed:
Figure 56 – PPTP WAN Type Configuration
Item Notes Description
IP Mode Mandatory
field.
Select either Static or Dynamic IP address for PPTP Internet connection.
When Static IP Address is selected, you will need to enter the WAN IP Address,
WAN Subnet Mask, and WAN Gateway.
WAN IP Address (mandatory field) – Enter the WAN IP address given by
your Service Provider.
WAN Subnet Mask (mandatory field) – Enter the WAN subnet mask
given by your Service Provider.
WAN Gateway (mandatory field) – Enter the WAN gateway IP address
given by your Service Provider.
When Dynamic IP is selected, there are no above settings required.
Server IP
Address/Name
Mandatory
field.
Enter the PPTP server name or IP Address.
PPTP Account Mandatory
field.
Enter the PPTP username provided by your Service Provider.
PPTP Password Mandatory
field.
Enter the PPTP connection password provided by your Service Provider.
Connection ID
Optional
setting
Enter a name to identify the PPTP connection.
MPPE
Optional
setting
Select Enable to enable MPPE (Microsoft Point-to-Point Encryption) security for PPTP
connection.
Table 39 – PPTP WAN Type Configuration

NetCommWireless NTC-400 Series Specifications

General

Brand	NetCommWireless
Model	NTC-400 Series
Category	Network Router
Language	English