Entering the path of the NetWare server directly
You can enter the path of the NetWare server.
1. Press [Manual Entry].
2. Press [NCP].
3. Select the connection type.
Press [NDS] to specify the folder in the NDS tree.
Press [Bindery] to specify the folder on the NetWare Bindery server.
4. Press [Manual Entry] on the right side of the path field.
The soft keyboard appears.
5. Enter the path for the folder.
If you set the connection type to [NDS], the NDS tree name is "tree", the name of the context including
the volume is "context", the volume name is "volume", and the folder name is "folder", the path will
be \\tree\volume.context\folder".
If you set the connection type to [Bindery], the NetWare server name is "server", the volume name is
"volume", and the folder name is "folder", the path will be "\\server\volume\folder".
6. Press [OK].
7. Enter the user name for logging on to the NDS tree or NetWare Bindery server.
Press [Manual Entry] to the right of the user name field. The soft keyboard appears.
Specifying Scan to Folder Destinations
69
To Next Page
Loading...
Need help?
General