Problem Cause Solution
Duplex printing is
malfunctioning.
[Apply Duplex] is set to [No]
for “Paper Type”.
In [Tray Paper Settings], under “Paper
Type”, set [Apply Duplex] to [Yes].
Duplex printing is
malfunctioning.
You cannot select duplex
printing if the paper type is set
to [Thick Paper 2].
In [Tray Paper Settings], under “Paper
Type”, select a paper type other than
[Thick Paper 2].
Other printing problems
Problem Cause Solution
It takes a long time to
complete a print job.
“Sleep mode” might be set. The machine requires time to warm up if
it has been in “Sleep mode”. In [System
Settings], under [Timer Settings], select
[Auto Off Timer], and then specify
“Sleep mode”.
It takes a long time to
complete a print job.
Photographs and other data
intensive pages take a long
time for the machine to
process, so simply wait when
printing such data.
If the Data In indicator is blinking, data
has been received by the printer. Wait
for a moment.
Changing the following settings with the
printer driver may help speed up
printing:
• On the [Print Quality] tab, select
[Speed] in the [Document type]
area.
• On the [Print Quality] tab, open the
[Change User Settings...] dialog
box, and then, on the [Image
Adjustments] tab, specify a lower
value for [Resolution:].
Images are printed in the
wrong orientation.
The feed orientation you
selected and the feed
orientation selected in the
printer driver's option setup
might not be the same.
Set the same settings for both the
machine's feed orientation and the feed
orientation specified in [Paper source
tray settings:] on the printer driver's
[Change Accessories] tab.
When using Windows
2000/ XP/ Vista and
Windows Server 2003/
2003 R2, optional
Bidirectional communication
is not working.
Set up optional devices on the Properties
of the printer.
See the printer driver Help.
Other Printing Problems
77
To Next Page
Loading...
