Message Cause Solution
"Exceeded max. number of
pages per file. Do you want
to store the scanned pages as
1 file?"
The file being stored has
exceeded the max. number of
pages for one file.
Specify whether to store the data or not.
Scan the pages that were not scanned
and store them as a new file. See
“Storing Files Using the Scanner
Function”, Scanner Reference.
"Exceeded max. number of
standby files. Try again after
the current file is sent."
The maximum number of
standby files was exceeded.
There are 100 files waiting in the
sending queue for e-mail, Scan to
Folder, or delivery functions. Wait until
files have been sent.
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing
files is unavailable."
Too many files are waiting to
be delivered.
Please try again after they have been
delivered.
"Exceeded max. page
capacity per file. Press [Send]
to send the scanned data, or
press [Cancel] to delete."
The number of scanned
pages exceeded maximum
page capacity.
Select whether to send the data so far.
"Exceeded maximum number
of file to store. Delete all
unnecessary files."
Too many files are waiting to
be delivered.
Please try again after they have been
delivered.
"Exceeded time limit for LDAP
server search. Check the
server status."
A network error has occurred
and connection has failed.
• Try the operation once more. If the
message is still shown, the network
may be crowded.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see “Programming the LDAP
server”, General Settings Guide.
"Invalid certificates or no S/
MIME certificates were
found."
The destination's S/MIME
certificates are invalid or
cannot be found.
Contact the administrator.
"LDAP server authentication
has failed. Check the
settings."
The user name and password
differ from those set for LDAP
Authentication.
In [System Settings], under
[Administrator Tools], check the settings
of LDAP server. For details, see
“Programming the LDAP server”,
General Settings Guide.
Messages Displayed When Using the Scanner Function
89
To Next Page
Loading...
