• 2 and 4 holes type (2 holes)
: A3 to A5, 11 × 17 to 5
1
/
2
× 8
1
/
2
: A4 to A5, 8
1
/
2
× 11, 5
1
/
2
× 8
1
/
2
• 2 and 4 holes type (4 holes)
: A3, B4 JIS, 11 × 17
: A4, B5 JIS, 8
1
/
2
× 11
• 2 and 3 holes type (2 holes)
: A3 to A5, 11 × 17 to 5
1
/
2
× 8
1
/
2
: A4 to A5, 8
1
/
2
× 11, 5
1
/
2
× 8
1
/
2
• 2 and 3 holes type (3 holes)
: A3, B4 JIS, 11 × 17
: A4, B5 JIS, 8
1
/
2
× 11
Size Magnification
• If the calculated ratio is over the maximum or under the minimum ratio, it is automatically adjusted
to within available range. However, with some ratios, parts of the image might not be copied
or margins will appear on copies.
• The machine selects reproduction ratios of between 25-400%.
Directional Size Magnification
• The reproduction ratio you can specify are 25-400%.
• When entering a percentage ratio, you can specify any value in the permitted range, regardless
of original or copy paper size. However, depending on settings and other conditions, part of
the image may not be copied, or margins will appear on copies.
• When entering a size in mm (inch), if the calculated ratio is over the maximum or under the
minimum ratio, it is automatically adjusted to within available range. However, with some ratios,
parts of the image might not be copied or margins will appear on copies.
Background Numbering
• The numbers appear to overlap the copied image in some cases.
Preset Stamp
• Depending on paper size, if you change the stamp size, parts of the stamp might not be printed.
Date Stamp
• When Date Stamp is used with the Combine, Magazine, or Booklet function, the date stamp is
printed as follows:
• With the Combine function
5. Appendix
178
To Next Page
Loading...
