Ricoh C231 - Page 150

SERVICE PROGRAM TABLE
4-14
C231/C237/C238 SM
No. Display Function Settings
Factory
Setting
Comments
38 ADF Scan
Line Adjust
Adjusts the ADF scanning
start position.
-4.9 to
4.9 mm
(0)
•
0.1 mm
steps.
•
Use the
Memory/
Class key for
"+" or "-".
•
See Remark
2
39 Trail Edge
Adjust
Adjusts the blank margin at
the trailing edge of prints.
0 to
3 mm
0 1 mm steps.
*40 Original Specifies the ima
g
e mode at
power-up.
0: Letter
1: Lt/Photo
2: Photo
0
*41 Image
Density
Specifies the image density
at power-up.
0: Light
1: Standard
2: Dark
3: Darker
1
*42 Print Speed Specifies the printing speed
at power-up.
1: 80 rpm
2: 100 rpm
3: 120 rpm
2
*43 Auto Cycle
Mode
Specifies whether Auto
Cycle mode is selected at
power-up.
0: No
1: Yes
1
*45 Std. Image
Position
Specifies the image position
at power-up.
40: +10mm

20: 0 mm

0: -10 mm
20
52
Compress
With Start
Key
Compressing the ejected
masters is done every time
the Start key is pressed for
the master making.
0: No
1: Yes
0 See Remark 3
60 Clear All
Memory
Returns all SP modes to the
default settings.
0: No
1: Yes
0 The memory is
cleared after
pressing the
Enter (#) key.
61 Clear
Memory/
Except Adj.
Returns all SP modes to the
default settings except for
Adjustments.
0: No
1: Yes
0 The memory is
cleared after
pressing the
Enter (#) key.
70 Original
Feed Jam
(A)
Displays the total number of
original jams.
0
71 Paper Feed
Jam (B)
Displays the total number of
paper feed jams.
0
72
Paper Wrap
Jam (E/BE)
Displays the total number of
times that paper has
accidentally wrapped
around the drum.
0