138 ProSYS Installation and Programming Manual
66
77
Disarm Codes, page 147
66
88
Miscellaneous, page 148
66
99
Special Communication, page 150
66
00
Accessory Code, page 150
To access the Report Codes menu:
From the main Installer Programming menu, press [6], or press the / or /
keys until you find the number [6] Report Codes option and then press /
. The first submenu (EMERGENCY KEY) appears:
You are now in the Report Codes menu and can access the required submenus for
programming the many event codes supported by the ProSYS, as described in the
following sections.
To Next Page
Loading...
