ProSYS Installation and Programming Manual 153
Report Codes: Accessory Code
Quick Keys Parameter Default
66
00
66
11
Trouble
00
Report codes for GSM faults:
[1] Tamper: report code of GSM box tamper alarm condition.
[2] Communication Trouble: report code of communication trouble between
the GSM module and the ProSYS.
[3] Mains Trouble: report Code of loss of main power to the GSM module.
[4] Low Battery: report code for low battery condition.
[5] General Trouble: report code for general GSM fault that can result from:
SIM card fault, Network availability, Network Quality, PIN code error, Module
communication, GPRS password, GPRS IP fault, GPRS Connection, PUK
code fault.
[6] Pre-alarm: report Code for correction of low battery condition.
66 00 66 22
Trouble Restore
00
Report codes for GSM faults restore:
[1] Tamper Restore: report code for the restore of the GSM box tamper alarm
condition.
[2] Communication Trouble Restore: report code for the restore of
communication trouble between the GSM module and the ProSYS.
3] Mains Trouble Restore: report code for the restore of loss of main power to
the GSM module.
[4] Low Battery Restore: report code for the restore of low battery condition.
[5] General Trouble Restore: report code for the restore of general GSM
troubles that can result from: SIM card trouble, Network availability, Network
Quality, PIN code error, Module communication, GPRS password, GPRS IP
fault, GPRS Connection, PUK code fault.
To Next Page
Loading...
Need help?
General
