Risco ProSYS series User Manual

164 ProSYS Installation and Programming Manual
Accessories: Add Delete Module
Quick Keys Parameter Default Range
3. Use the / or / keys to position the cursor at
ID=1 and type in the Proximity Key Reader ID number as defined by the
dip switches that you set when you installed the module.
4. With the cursor positioned at the TYPE field, use the
/ key
to toggle and choose the PKR option.
5. Press
/ . The following display appears:
6. Use the / key to toggle and choose [Y] YES.
 If YES, the partitions will be armed instantly.
 If NO, the Exit Delay time period will be applied.
7. Press
/ . The following display appears:
P=123456789 KR01:
Y........
P=123456789 KR01:
Y........
8. Use the / or / keys and the /
key to assign the partitions that will be affected by the instant arm function.
9. Press
/ . The following display appears:
10. Use the / key to toggle and choose the required option:
 If YES, the ready status will be indicated on the reader.
 If NO, no ready status indication will be indicated on the reader.
11. Press
/ . The following display appears:
KEY READER ID=01
SHOW ARM? Y
KEY READER ID=01
SHOW ARM? Y
 If YES, the Arm status will be indicated on the reader.
 If NO, no Arm status indication will be indicated on the reader
12. Press
/ . The following display appears:
KEY READER ID=01
SHOW STAY? Y
KEY READER ID=01
SHOW STAY? Y
 If YES, the Stay status will be indicated on the reader.
 If NO, no Stay status indication will be indicated on the reader
13. Press
/ . The following display appears:
KEY READER ID=01
SHOW BYPASS? Y
KEY READER ID=01
SHOW BYPASS? Y
If YES, the Bypass status will be indicated on the reader.If NO, no Bypass

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud