Risco ProSYS series User Manual

ProSYS Installation and Programming Manual 223
EVENT MESSAGE DESCRIPTION
SOAK FAIL
Z=XXX
Zone XXX has failed in the Soak Test
SPEC. KP=XX
Special alarm from keypad (ID=XX) (keys 7 & 8)
SPK TRBL RS
S=X
Speaker trouble restore on siren ID=X
SPK TRBL
SIREN=X
Speaker trouble on siren ID=X
START EXIT P=X
Exit time started in partition X
TAMPER EVLOG
Tamper alarm from event log expander ID=X
TAMPER KP=XX
Tamper alarm from keypad ID=XX (wall tamper or cover tamper)
TAMPER PS=X
Tamper alarm from power supply expander ID=X
TAMPER
SIREN=X
Tamper alarm from siren ID=X
TAMPER UO=X
Tamper alarm from UO expander ID=X
TAMPER VOICE
Tamper alarm from Advanced Voice module
TAMPER WBA=X
Tamper alarm from wireless keyfob expander ID=X
TAMPER ZE=X
Tamper alarm in zone expander ID=X
TAMPER
ZN=XXX
Tamper alarm from zone XXX
TMP RS EVLOG
Tamper alarm restore from event log expander ID=X
TMP RS KP=XX
Keypad tamper restore
TMP RS PS=X
Tamper alarm restore from power supply expander ID=X
TMP RS UO=X
Tamper alarm restore from UO expander ID=X
TMP RS VOICE
Tamper alarm restore from Advanced Voice module
TMP RS WBA=X
Tamper alarm restore from wireless keyfob expander ID=X
TMP RS ZE=X
Tamper alarm restore in zone expander ID=X
TMP RS ZN=XXX
Tamper alarm restore on zone XXX
TMP RSTR
SIREN=X
Tamper restore from siren ID=X
TRB RS PRN=X
Trouble restore in printer module ID=X
TRBL PRN=X
Trouble in printer module ID=X
UNBYP
BOX+BELL
Box and bell tampers are unbypassed
UNBYPS
ZN=XXX
Zone XXX is unbypassed
UO REST
ZN=XXX
A zone defined as “UO Trigger” has been deactivated
UO TRIG
ZN=XXX
A zone defined as “UO Trigger” has been activated

Risco ProSYS series Specifications

General

Communication	IP, GSM, PSTN
Wireless Protocol	Two-way wireless
Battery Backup	Yes
Remote Control	Yes, via app
Integration	RISCO Cloud