Neutral folder
Buttons
Check validity All batch instances, starting with the selected object (here, a parameter of
an equipment operation), are checked for consistency with the batch types
and for conformity to ISA-88. The validity errors and validity warnings are
displayed in the log field and can be visualized using the "Display" button.
Update All batch instances are adapted according to the batch types. This action
is always required if a change has been made to batch types of existing
batch instances (e.g., inserting a new parameter, changing the unit of
measure, etc.).
New Opens a dialog where an object can be created below the neutral folder.
Delete Deletes the selected object.
Log
"Errors" display field The number of errors for the selected log is displayed.
"Warnings" display field The number of warnings for the selected log is displayed.
"Display" button The logging is activated with the "Display" button. The selected log is
generated as an XML file in the specified layout and displayed in In‐
ternet Explorer.
Select "Process cell" and click the "Display" button to show all process
cell errors or warnings. You can also right-click a selected object and
select the "Display log" function to display object-specific errors or
warnings.
Additional functions
Displays: All instance parameters that refer to this phase type parameter are listed in a dialog
box. Certain attributes can be selected by means of a special filter.
OK button
Saves your settings and closes the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 1025
To Next Page
Loading...
