● Delete: The "Delete" button deletes the selected condition (row). The button is only available
in the Recipe Editor.
● Close: Closes the dialog without saving changes.
14.1.10.15 "Allocation list" tab (library reference properties)
Transition queries within a library operation can contain queries of other recipe unit procedures.
Since a library operation is created independent of a master recipe, after inserting the library
operation into a recipe unit procedure as a library reference, a unique assignment has to be
made between such transition queries and other recipe unit procedures.
Parameter:
● Library reference: This column lists the units referenced by the transition queries of the
library operations and their names.
● Unit class: This column shows the unit class of the library operation.
● Allocation: In this column, the recipe unit procedures for which queries are made within the
library operation (for example, transition queries of other recipe units) are assigned. If
several recipe unit procedures are available, no new assignment can be made.
14.1.10.16 "Description" tab (ROP, RPH properties)
Description:
In the dialogs for the steps with links to EOP, EPH or a library sequence, you can enter an
explanatory text.
14.1.10.17 "Subcondition" tab
This displays the conditions for the units of the lower-level recipe level.
The lower-level conditions are linked by AND to the upper level (cannot be changed).
14.1.11 Dialog boxes
14.1.11.1 "Validate" dialog box
This dialog displays the results of the validation. You can call up the validation function yourself
or it is started and run automatically by the system during configuration. The validation function
is available and is executed with the following configurations:
● In the recipe editor to check the recipe
● When a batch is added
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 833
To Next Page
Loading...
Need help?
General
