14.1.6 BCC Formula Properties dialog box
14.1.6.1 "General" tab (Formula property)
Introduction
The properties of the formula are displayed, as follows:
● Name
● Version
● Status (processing status)
● Formula category for which the formula was created
● Reference quantity for quantity scaling (from the referenced master recipe)
Master recipe:
In this input field, you select a suitable master recipe for the selected formula. The master
recipes assigned to the relevant formula category are displayed (master recipe property). After
you have made your selection, the "Reference quantity for quantity scaling" is updated in the
adjacent field.
Description:
You can also enter a comment explaining the formula.
The "Description" text field is limited to 255 characters. Any additional characters are not saved.
14.1.6.2 "Product" tab (formula property)
Product:
With the button to the right of the input field, you open a dialog in which you can select the
materials to be used as products (BatchCC > materials). The selected product becomes the
main product of the formula to which the quantity information relates.
Product code:
This is where the code for the selected product is displayed. The product code is read from
the created material and can only be changed there.
Standard quantity for quantity scaling:
The standard quantity is the reference for quantity scaling. All quantity-dependent values in
the recipe are based on this quantity. The quantity scaling factor is derived from the ratio:
Concrete quantity to reference quantity.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 789
To Next Page
Loading...
Need help?
General
