"Automatic" button
This allows you to automate the creation of the batch. After entering the total quantity, the
number of batches and quantities are calculated automatically. A maximum of 100 batches
can be created in automatic mode.
"New" button
The "New" button opens a dialog in which you can select a formula or a master recipe. You
can then make the settings for the batch quantity, start mode, master recipe / formula etc.
"Delete" button
The "Delete" button deletes a previously selected batch.
"OK" button
This generates the batches shown in the table in the appropriate batch folder.
"Print" button
This immediately prints the batches shown in the table list on the selected printer without prior
layout configuration.
"Cancel" button
This closes the dialog without batches having been created.
"Help" button
Opens the online help for this dialog.
14.1.7.2 "Comments" tab
Introduction
This dialog is displayed as a tab in the Dialog properties dialog of RUP, ROP, RPH etc. You
can create comments for an element of a control recipe.
Requirement
The "Comments" tab in the properties dialog is only visible in the control recipe.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
792 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
