14.10.20 Open pane
Function
This function opens a detail window of the SFC visualization. The detail window is not closed
automatically not even when BatchCC is closed. If you open the detail window again in another
BatchCC, the detail window can be displayed twice.
If the "Always display in faceplate" check box is enabled in the SFC topology settings in the
WinCC Explorer, the SFC visualization is always displayed with the SFC overview window and
SFC detail window.
Requirements
● The corresponding recipe phase must be configured as an SFC type in PCS 7 Engineering.
● The PCS 7 OS Client add-on must also be installed on the PC in addition to an installation
of the BATCH Client.
14.10.21 Control recipe: Batch
This is the control recipe for the batch you brought into view.
14.10.22 Number of queued jobs
Displays the number of queued jobs. Completed jobs with regard to the total number of jobs.
Additional information
Layout of the main window (BatchCC) (Page 247)
14.10.23 Current job being processed
Displays the job that is currently being processed.
Additional information
Layout of the main window (BatchCC) (Page 247)
14.10.24 Cancel queued jobs
Use this command to cancel processing of queued jobs.
Context help references
14.10 Shortcut menu commands
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 1121
To Next Page
Loading...
Need help?
General
