● When a batch is released
● When a process cell is updated
Display
By selecting or deselecting the check box, you specify which event types are displayed. The
following event types are possible:
● Errors and/or
● Warnings and/or
● Information
The system always shows all three event types. The numbers in brackets indicate the number
of objects related to the event type.
Reported errors must be eliminated otherwise the validation will not be completed successfully.
An object with errors will not be used.
Sorting and filter functions
The column contents can be sorted by clicking on the table header of any column. Below the
table headers there is also a filter function for each column. Here, enter your filter criterion so
that only the required validation messages are displayed.
Eliminating errors with a comment
For each error, the type, number, element name and a comment are shown in a table row.
The comments contain information for localizing and eliminating errors. When you select a
row, other information is displayed in the lower area. The information depends on the object
and includes, for example the date, time, ID, name, quantity information etc.
If the error is in a master recipe and the recipe editor is open, you can open the relevant master
recipe at the location of the error by double clicking on one of the error rows.
Save to file
You can save the information from the validation as a text file by clicking the "Save to file"
button.
14.1.11.2 "No candidates available" dialog box
This dialog displays the results of the validation. You can call up the validation function yourself
or it is started and run automatically by the system during configuration. The validation function
is available and is executed with the following configurations:
● In the recipe editor to check the recipe
● When a batch is added
● When a batch is released
● When a process cell is updated
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
834 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
