Max. number of parameters in tooltips
Maximum number of parameters in the tooltip for a recipe step.
Max. number of lines in the tooltips
Maximum number of text lines in the tooltip for a recipe step.
14.1.1.2 "Dimensions" tab
The layout settings made here apply to working with the BATCH Recipe Editor and in the recipe
view during batch control.
Vertical spacing of the objects:
Specifies the spacing between objects above and below their icons.
Horizontal spacing of the objects:
Specifies the spacing between objects to the left and right of their symbol.
Selection range of lines:
Specifies the tolerance for line selection. If low values are set, the line must be hit exactly to
select the sequence.
Line width:
Specifies the width of lines. "0" specifies a hairline, its thickness depends on the currently
selected resolution.
Grid in X/Y direction:
The grid is used as a factor for all other dimensions. It enlarges or reduces everything, similar
to zooming.
Width and height of steps and transitions:
You can set the width and height of the steps and transitions.
Connector distance from margin:
You can change the position of the steps and transitions relative to the line.
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
724 Operating Manual, 02/2016, A5E35958174-AA
To Next Page
Loading...
Need help?
General
