Siemens SIMATIC BATCH User Manual

To execute the key command “Ctrl+1” press the keys “Ctrl” and “1”.
Use the “1” from the main block. The “1” in the numeric pad works only with some languages.
13.4 Command line parameters for BatchCC
Parameters
The following table shows the required command line parameters for starting BatchCC and
the viewer for archived batches.
Command line parameters Description Example
-v Starts the BatchCC in the "Viewer for archived
batches" mode
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -v
-o Starts the BatchCC in the 'Foreground' mode.
This means that the window is always on top
of all other normal windows including WinCC
Runtime. Other windows with the 'Fore‐
ground" attribute can, however, be on top of
the BatchCC window.
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -o
-c="x;y;dx;dy" Permitted display area. The screen coordi‐
nates define the area in which BatchCC can
move.
x,y: Top left corner of the area, dx, dy width
and height of the area.
"C:\Program Files (x86)\SIEMENS\BATCH
\sbbatchcc32ux.exe" -c="0;0;1000;1000"
Appendix
13.4 Command line parameters for BatchCC
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA 721

Siemens SIMATIC BATCH Specifications

General

Brand	Siemens
Model	SIMATIC BATCH
Category	Control Systems
Language	English