Siemens SIMATIC BATCH User Manual

14.1.12.22 "Phase type parameters_EPH" selection
Phase type parameters_EPH selection
You have selected the "Phase type parameters_EPH" object in the "Process cell data" list.
You can only change and use the properties and functions of the selected object with versions
5 and 6i.
Runtime name in the dialog header
Display of the runtime name.
Process cell data
For navigation in the process cell data.
Properties
Name of the object selected in the process cell tree.
Description You can display or enter the description of the phase type parameter in
this text box.
Display name The display name is derived from the basic engineering of the SFC type.
The display name specified under Characteristics > Setpoints is dis‐
played in the configuration dialog. Name must be changed in basic en‐
gineering.
I/O name The I/O name is derived from the basic engineering of the SFC type.
The I/O name specified under Characteristics > Setpoints is displayed
in the configuration dialog. Name must be changed in basic engineering.
Assigned data type Assign the required data type to the type parameter. All standard data
types and user data types are available for selection. You must declare
required user data types under the shared declarations and make them
available by using the "Generate" function in SIMATIC BATCH.
"Data type" button Activating this button takes you to the corresponding data type. With the
"Back" button of the data type, you return to beginning selection.
Assigned unit of measure Assign the unit of measure to the type parameter. You must declare
required units of measure under "Units of measure" in the shared dec‐
larations and make them available by using the "Generate" function in
SIMATIC BATCH.
"Unit of measure" button Activating this button takes you to the appropriate unit. With the "Back"
button of the unit of measure, you return to this location.
"Archive measured value"
check box
Select this check box if you wish to establish a connection to a WinCC
archive tag for the instance parameter. This selection is required for
assigning instance parameters to WinCC archive tags. You then make
this assignment on the instance parameters of the corresponding oper‐
ation type.
"Test manufacturing instruc‐
tion" check box
A type parameter is selected here if it is to be provided in the batch log
for the manual check (manufacturing instruction).
Context help references
14.1 Dialogs
SIMATIC BATCH V8.2
890 Operating Manual, 02/2016, A5E35958174-AA

Siemens SIMATIC BATCH Specifications

General

Brand	Siemens
Model	SIMATIC BATCH
Category	Control Systems
Language	English