Siemens SIMATIC BATCH User Manual

Intended use Program
package
Components Authorizations
PC as classic BATCH Client BATCH Client
● BATCH Base
● BATCH Client
BATCH Single Station User or
BATCH Client and BATCH Recipe
System
Information server on which
the SIMATIC BATCH reports
are created
-
● Information Server - BATCH
Options
Without license
You install the required SIMATIC BATCH software package on the appropriate PCs depending
on the type of system you have. The accompanying authorizations are required to use the
BATCH software packages. The acquired authorizations are managed with the Automation
License Manager.
The SIMATIC BATCH COM API package is an optional package for SIMATIC BATCH. It
provides you with an interface for accessing SIMATIC BATCH data and initiating actions with
function calls. If authorization is not available, you still have read access to the data. With
authorization, you also have write access to the data.
Additional information
Authorizations (Page 83)
3.9.2 SIMATIC BATCH Basic
Authorization characteristics of SIMATIC BATCH Basic
SIMATIC BATCH Basic requires no separate installation. A BATCH client that checks the
authorizations on a BATCH server to distinguish SIMATIC BATCH and SIMATIC BATCH
Basic. The scope of functions for BATCH clients depends on the authorizations transferred to
the BATCH server. BATCH clients are, for example, instances of BatchCC, BATCH OS
controls or API clients.
If a BATCH server contains both the authorization for SIMATIC BATCH and SIMATIC BATCH
Basic, the higher authorization is used with full functionality.
Functional scope of SIMATIC BATCH Basic
The following functions are not available or only available in restricted form in SIMATIC BATCH
Basic:
● The "Libraries" and "Formulas" folders are not displayed in the project tree of BatchCC.
The libraries and formulas can therefore not be used.
If you import a system backup containing libraries or formulas, the two folders and the
objects they contain are shown in BatchCC. In this case, the library or formula can be
released, but not the recipe that uses the library or formula.
● No "Synchronization" tab in the properties dialog for recipe engineering. This means the
connection to MES (MES_Sync_Request) cannot be configured or used.
Product introduction and installation
3.9 Installation
SIMATIC BATCH V8.2
80 Operating Manual, 02/2016, A5E35958174-AA

Siemens SIMATIC BATCH Specifications

General

Brand	Siemens
Model	SIMATIC BATCH
Category	Control Systems
Language	English